Classic Cars Wiki
Register
Advertisement
Classic Cars Wiki
BMC rosette

The British Motor Corporation Limited, BMC was a Longbridge, Birmingham, United Kingdom based vehicle manufacturer, a new holding company formed in early 1952 to give effect to an agreed merger of the Morris and Austin businesses.

BMC acquired the shares in both Morris Motors Limited and The Austin Motor Company Limited. Morris Motors Limited (the holding company of the productive businesses of the Nuffield Organisation) owned MG, Riley and Wolseley.

The agreed exchange of shares in Morris or Austin for shares in the new holding company, BMC, became effective in mid-April 1952.

On 14 December 1966 BMC changed its name to British Motor Holdings Limited or BMH.

In turn BMH was to merge with Leyland in May 1968 becoming a major part of British Leyland Motor Corporation.

Organisation[]

BMC was the largest British car company of its day, with (in 1952) 39 percent of British output, producing a wide range of cars under brand names including Austin, Morris, MG, Austin-Healey, Wolseley as well as commercial vehicles and agricultural tractors. The first chairman was Lord Nuffield (William Morris) but he was replaced in August 1952 by Austin's Leonard Lord who continued in that role until his 65th birthday in 1961 but handing over, in theory at least, the managing director responsibilities to his deputy George Harriman in 1956.

BMC's headquarters were at the Austin plant at Longbridge, near Birmingham and Austin was the dominant partner in the group mainly because of the chairman. The use of Morris engine designs was dropped within 3 years and all new car designs were coded ADO from "Austin Drawing Office". The Longbridge plant was up to date, having been thoroughly modernised in 1951, and compared very favourably with Nuffield's 16 different and often old fashioned factories scattered over the English Midlands. Austin's management systems however, especially cost control and marketing, were not as good as Nuffield's and as the market changed from a shortage of cars to competition this was to tell. The biggest-selling car, the Mini, was famously analysed by Ford Motor Company who concluded that BMC must be losing £30 on every one sold. The result was that although volumes held up well throughout the BMC era, market share fell as did profitability and hence investment in new models, triggering the 1966 merger with Jaguar to form British Motor Holdings (BMH), and three years later leading to the government sponsored merger of BMH with Leyland Motor Corporation.

At the time of the mergers, there was a well established dealership network for each of the marques. Among the car-buying British public there was a tendency of loyalty to a particular marque and marques appealed to different market segments. This meant that marques competed against each other in some areas, though some marques had a larger range than others. The Riley and Wolseley models were selling in very small numbers. Styling was also getting distinctly old fashioned and this caused Leonard Lord, in an unusual move for him, to call upon the services of an external stylist.

BMC Farina[]

In 1958, BMC hired Battista Farina to redesign its entire car line. This resulted in the creation of three "Farina" saloons, each of which was badge-engineered to fit the various BMC car lines:

The compact Farina model bowed in 1958 with the Austin A40 Farina. This is considered by many to be the first mass produced hatchback car: a small estate version was produced with a horizontally split tailgate, its size and configuration would today be considered that of a small hatchback. A Mark II A40 Farina appeared in 1961 and was produced through 1967. These small cars used the A-Series engine.

The mid-sized Farinas were launched in 1958 with the Wolseley 15/60. Other members of the group included the Riley 4/68, Austin A55 Cambridge Mk. II, MG Magnette Mk. III, and Morris Oxford V. Later, the design was licensed in Argentina and produced as the Siam Di Tella 1500, Traveller station wagon and Argenta pickup. The mid-size cars used the B-Series straight-4 engine.

Most of these cars lasted until 1961, though the Di Tellas remained until 1966. They were replaced with a new Farina body style and most were renamed. These were the Austin A60 Cambridge, MG Magnette Mk. IV, Morris Oxford VI, Riley 4/72, and Wolseley 16/60 and in 1964 the Siam Magnette 1622 alongside the Siam Di Tella in Argentina. These mostly remained in production until 1968, with no rear wheel drive replacement produced.

Farina also designed a large car. Launched in 1959 as the Austin A99 Westminster, Vanden Plas Princess 3-Litre, and Wolseley 6/99, it used the large C-Series straight-6 engine. The large Farinas were updated in 1961 as the Austin A110 Westminster, Vanden Plas Princess 3-Litre Mk. II, and Wolseley 6/110. These remained in production until 1968.

BMC Cars[]

"Inherited" Models[]

Austin[]

  • Austin A125 Sheerline 1947-1954
  • Austin A135 Princess 1947-1956
  • Austin A40 Sports 1950-1953
  • Austin A70 Hereford 1950-1954
  • Austin A30 1951-1956
  • Austin A90 Atlantic 1949-1952
  • Austin A40 Devon 1947-1952

MG[]

  • MG TD 1949-1953
  • MG Y-type 1947-1953

Morris[]

  • Morris Minor 1948-1971
  • Morris Oxford (Series MO) 1948-1954
  • Morris Six MS 1948-1953

Riley[]

  • Riley RM series 1945-1955

Wolseley[]

  • Wolseley 4/50 1948-1953
  • Wolseley 6/80 1948-1954
  • Wolseley Oxford Taxi 1947-1955

BMC Designs[]

Austin[]

  • Austin A40 Somerset 1952-1954
  • Austin A40 Cambridge 1954-1958
  • Austin A90 Westminster 1954-1968
  • Austin Metropolitan 1954-1961
  • Austin A35 1956-1959
  • Austin Lancer (Australia) 1958-1962
  • Austin Princess IV 1956-1959
  • Austin A40 Farina 1958-1967
  • Austin A55 Cambridge 1959-1969
  • Austin Mini 1959-1989
  • Austin Freeway (Australia) 1962-1965
  • Austin 1100/1300 1963-1974
  • Austin 1800 1964-1975
  • Austin 3-Litre 1967-1971
  • Austin Maxi 1969-1981 (Designed in the BMC era)

Austin-Healey[]

  • Austin-Healey 100 1953-1959
  • Austin-Healey 3000 1959-1968
  • Austin-Healey Sprite 1958-1971

MG[]

  • MG A 1955-1962
  • MG Magnette ZA/ZB 1953-1959
  • MG Magnette Mk III/Mk IV 1959-1968
  • MG Midget 1961-1974
  • MGB 1962-1980
  • MG 1100/1300 1962-1973
  • MGC 1967-1969

Morris[]

  • Morris Oxford 1954-1971
  • Morris Cowley 1954-1959
  • Morris Isis 1955-1958
  • Morris Marshal (Australia) 1957-1960
  • Morris Major (Australia) 1958-1964
  • Morris Mini-Minor 1959-2000
  • Morris 1100/1300 1963-1974
  • Morris 1800 1964-1975

Riley[]

  • Riley Pathfinder 1953-1957
  • Riley 2.6 1958-1959
  • Riley 1.5 1957-1965
  • Riley 4/68 1959-1961
  • Riley 4/72 1961-1969
  • Riley Elf 1961-1969
  • Riley Kestrel 1965-1969

Vanden Plas[]

  • Vanden Plas 3 litre
  • Vanden Plas 1100/1300 1963-1974
  • Vanden Plas Princess 4 litre R 1964-1968

Wolseley[]

  • Wolseley 4/44 1952-1956
  • Wolseley 6/90 1954-1959
  • Wolseley 15/50 1956-1958
  • Wolseley 1500 1957-1965
  • Wolseley 15/60 1958-1961
  • Wolseley 16/60 1961-1971
  • Wolseley 6/99 1959-1961
  • Wolseley 6/110 1961-1968
  • Wolseley Hornet 1961-1969
  • Wolseley 24/80 (Australia) 1962-1967
  • Wolsleley 1100/1300 1965-1973
  • Wolseley 18/85 1967-1972



BMC Project Numbers[]

Most BMC projects followed the earlier Austin practice of describing vehicles with an 'ADO' number (which stands for 'Austin Design Office', but also sometimes known as the 'Amalgamated Drawing Office'). Hence cars that had more than one marque name (e.g. Austin Seven and Morris Mini Minor) would have the same ADO number. Given the often complex badge-engineering that BMC undertook, it is common amongst enthusiasts to use the ADO number when referring to vehicles as a single design (for example, saying 'The ADO15 entered production in 1959'- this encompasses the fact that when launched, the ADO15 was marketed as both the Morris Mini Minor and the Austin Seven). The ADO numbers used were as follows:

  • ADO6 Austin FX4 Taxi
  • ADO8 Austin A40 Farina
  • ADO9 Austin A55 Cambridge
  • ADO10 Austin A90 Westminster
  • ADO13 Austin-Healey Sprite
  • ADO14 Austin Maxi
  • ADO15 Mini
  • ADO16 1100/1300
  • ADO17 1800/2200
  • ADO20 Mini MkIII and Clubman
  • ADO23 MGB
  • ADO26 Austin Healey 3000 MkIII
  • ADO27 Austin Kimberley
  • ADO28 Morris Marina
  • ADO31 MGA 1600
  • ADO34 Pininfarina design for 2 seat roadster based on Mini.
  • ADO37 Vanden Plas Princess 3 litre
  • ADO40 Wolseley 24/80
  • ADO41 Austin-Healey Sprite MkII
  • ADO47 MG Midget MkI
  • ADO50 Mini Cooper and Cooper S
  • ADO52 MGC
  • ADO53 Austin A110 Westminster
  • ADO59 Morris Minor 1000
  • ADO61 Austin 3-Litre
  • ADO66 Vanden Plas Princess 4-litre R
  • ADO67 Austin Allegro
  • ADO88 Mini Metro

BMC Commercial Vehicles[]

Most BMC era commercial vehicles were sold as Morris but there were sometimes Austin equivalents. Radiator badges on the larger vehicles were often BMC.

Car based light vans[]

  • Morris Z-series ¼-ton (Morris Eight Series E) 1940-1953
  • Morris ¼-ton O-Type (Morris Minor van) 1953-1971
  • Morris Cowley MCV (Morris Oxford van) 1950-1956
  • Austin A30 van 1954-1956
  • Austin A35 van 1956-1968
  • Austin A35 pick-up 1956-1957
  • Morris ½-ton (Morris Oxford Series III van) 1956-1962
  • Austin A55/A60 van 1958-1972
  • Austin A55/A60 pick-up (Australian built) 1958-1972
  • Mini van 1960-1982
  • Mini pick-up 1961-1982
  • Austin A40 Farina van (export only) 1961-1967
  • Austin 1800 ute(pick-up) (Australia built) 1967-1974

Light Vans[]

  • Austin K8 1948-1954
  • Morris J-type 1949-1960
  • Morris LD 1952-1968
  • Morris J2 1956-1967
  • Morris 250 JU 1967-
  • Austin/Morris J4 1960-1974

Light lorries[]

  • Morris LC4 1952-1954
  • Morris LC5 1954-1960
  • Morris FV-series (Series I) 1948-1954
  • Morris FV-series (Series II) 1954-1955
  • Morris FE-series (Series III) 1955-1959
  • Morris FG 1960-1968
  • Morris FM 1961-1968
  • Morris WE 1955-1964
  • Morris WF 1964-1981
  • Morris FF 1958-1961
  • Morris FH 1961-1964
  • Morris FJ 1964-1968

BMC agricultural vehicles[]

With the merge of the Nuffield and Austin interests, the Nuffield Organisation's tractors became part of BMC.

  • Nuffield Universal

BMC abroad[]

In the 1950s and the 1960s, BMC set-up twenty-one plants overseas, some as subsidiaries, and some as joint ventures, to assemble their vehicles. One was British Motor Corporation (Australia) which was established in 1953 at the Nuffield Australia site on the one time Victoria Park horse racetrack in Sydney. This facility went from a marshalling area for fully imported Morris cars (Austins were up until then being assembled in Melbourne, Victoria from an earlier Austin Motors establishment), to a facility for making CKD cars, to the total local fabrication and construction of vehicles, engines, and mechanicals.

Denmark was a particularly strong market for BMC products in Europe. In the post-war period, the Danish government closely regulated exports and imports to maintain the country's balance of trade. High-value imports such as cars were heavily taxed. Britain bought large amounts of agricultural and meat produce from Denmark, and in response British cars were subject to a much lower import tax than cars from other countries, making BMC products very popular in the country until the 1970s, when these regulations were relaxed.

The end of BMC[]

British Motor Holdings Limited[]

In mid-1965 BMC offered to buy its major supplier Pressed Steel and took control in September. Twelve months later BMC purchased Jaguar Cars. On 14 December 1966 BMC shareholders approved the change of its name to British Motor Holdings (BMH) and it took effect from that moment.

British Leyland Motor Corporation Limited[]

Little more than 12 months later in January 1968, under pressure from the Labour British Government and Minister of Technology Tony Benn, there was a further wave of mergers in the British car industry. BMH merged with the Leyland Motor Corporation (LMC) to form the British Leyland Motor Corporation (BLMC), the original BMC mass-production, and MG sports car products being brought together into the Austin Morris division of the new organisation.

British Leyland Limited[]

In August 1975 BLMC was partly nationalised and renamed British Leyland Limited.

Post Mortem[]

Following the "merger" with Leyland, the new company's board bore an uncanny resemblance to the senior management team that had hitherto headed up the Leyland half of the partnership, so comments of the management team on the profitability of the former BMC elements need to be viewed with caution. However, following a review of company records undertaken with the support of the new board, author Graham Turner stated that at the time of the merger there were 16 versions of the Mini being produced, yielding an average profit of just £16 per car, while every Morris Minor sold lost the group £9 and every Austin Westminster sold lost £17. This helps to explain why the Westminster and Minor were among the early casualties of the merger, as well as the introduction of the Mini Clubman, capable of being built for less but sold for more than a standard Mini thanks to simplified ("modernised") front panels. Even the UK's best seller, the Austin/Morris 1100 had to be subjected to an emergency cost reduction programme which removed approximately £10 from the cost of each car, applying changes that included the omission of lead sealing from body joints (£2.40 per car), removing provision for optional reversing lamps (£0.10) and "changes in body finish" (£0.75). Rebuilding the Cowley plant to include "new automated body building facilities" saved £2.00 in transport costs per car for bodies that no longer needed to be transported from the corporation's Swindon plant and in the longer term further transport costs were saved by concentrating assembly of the model at a single plant, rather than splitting it between plants at Cowley and Longbridge. Because of the high proportion of auto-production costs represented by fixed costs that needed to be allocated over a planned production volume, and the use in the 1960s of investment appraisal criteria that were ill-suited to accounting for volume fluctuations and the rapidly changing value of the UK currency in the 1960s, the precise figures quoted may be open to challenge, but the new management's diagnosis that BMC's profitability was insufficient to fund support and new model investment to cover its disparate range of brands and models was hard to refute.

Life after death[]

In 2002, BMC (Turkey), a Turkish commercial vehicle builder, originally set up by the British Motor Corporation to build their designs under licence in the 1950s, began exporting its vehicles to Britain. This saw the return of the BMC brand to British roads for the first time in over 40 years.

All items (17)

Advertisement